86BL114-30L4
440 W, 48 V square 86 mm BLDC motor (1.4 N·m, 3000 rpm) from Shenzhen Mayi Motor, made in Shiyan, Bao'an.
Figures are copied from the maker’s published datasheet; curves are calculated from them. Confirm with the manufacturer before ordering. Not stated on the datasheet, estimated from it: torque constant, resistance, inductance, no-load current, rotor inertia, shaft diameter, insulation class, IP rating.
How this motor is made
Full manufacturing overview: 57 mm Inner-rotor BLDC Motor →86 mm frame with a longer or shorter stack and its own winding; built with the same process as the 57 mm reference.
- 1. Lamination stamping & interlocking
- 2. Stator insulation
- 3. Winding
- 4. Terminal connection
- 5. Stator in-process test
- 6. Impregnation & curing
- 7. Rotor assembly
- 8. Magnetizing
- 9. Rotor balancing
- 10. Final assembly
- 11. End-of-line test
Export certification: Low-voltage motor without electronics
- Rated power
- 439 W
- Rated torque
- 1.4 N·m
- Rated speed
- 2,996 rpm
- Rated efficiency
- 84.8 %
Performance curves
Calculated with the linear DC-motor model (constant 48 V supply, ignoring resistance rise with temperature).
Full specifications
General
- Motor type
- BLDC Motor
- Series
- Mayi 86BL
- Frame / flange
- 86 mm
Rated Values
- Rated voltage
- 48 V
- Rated power
- 439 W
- Rated torque
- 1.4 N·m
- Rated speed
- 2,996 rpm
- Rated current
- 10.8 A
Performance
- Stall torque
- 23.5 N·m
- No-load speed
- 3,186 rpm
- Rated efficiency
- 84.8 %
- Peak efficiency
- 85.1 %
Electrical
- Torque constant Kt
- 0.143 N·m/A
- Back-EMF constant Ke
- 15 V/krpm
- Resistance
- 0.29 Ω
- Inductance
- 0.6 mH
- No-load current
- 1 A
- Stall current
- 166 A
- Electrical time constant
- 2.07 ms
- Mechanical time constant
- 3.4 ms
Mechanical
- Rotor inertia
- 2,400 g·cm²
- Body length
- 114 mm
- Shaft diameter
- 14 mm
- Weight
- 2.81 kg
- Power density
- 156 W/kg
- Protection
- IP40
Compatible drivers
All drivers →Drivers whose supply voltage covers this motor and whose continuous current is at least its rated current; drivers from the same maker first. Confirm Hall/encoder type and settings with the maker.
| Model | Maker | Motor type | Supply | Cont. / peak current | Feedback |
|---|---|---|---|---|---|
| DBL-15RS | Mayi Motor | BLDC | 18–60 V DC | 15 A | Hall sensors |
| DBL4815RS | Mayi Motor | BLDC | 18–55.2 V DC | 15 A / 50 A | |
| DBL-30RS | Mayi Motor | BLDC | 18–60 V DC | 30 A | Hall sensors |
| DCPC-09016-OPE | ZP Motors | BLDC, Servo | 18–90 V DC | 11 A / 33 A | Hall sensors, Incremental encoder |
| APD-12D80-CALTE | TechServo | BLDC, Servo, DC | 20–90 V DC | 12 A / 36 A | Incremental encoder, Hall sensors, Sensorless |
| APS-12D80-RALTE | TechServo | BLDC, Servo, DC | 18–80 V DC | 12 A / 36 A | Incremental encoder, Hall sensors, Sensorless |