AE6435
534.1 W, 40 V Ø64 mm BLDC motor from Topband Motor: 0.85 N·m rated at 6000 rpm.
Figures are copied from the maker’s published datasheet; curves are calculated from them. Confirm with the manufacturer before ordering. Not stated on the datasheet, estimated from it: torque constant (fitted to the rated point), resistance (fitted to the rated point), inductance, rotor inertia, insulation class, IP rating.
How this motor is made
Full manufacturing overview: 70 mm Outer-rotor BLDC Motor →Ø64 mm frame; built with the same process as the 70 mm outer-rotor reference series.
- 1. Stator lamination stamping & interlocking
- 2. Stator powder coating
- 3. Outer-stator winding
- 4. Terminal soldering
- 5. Stator in-process test
- 6. Trickle impregnation (optional)
- 7. Stator mounting & Hall board
- 8. Rotor cup assembly
- 9. Magnetizing
- 10. Rotor balancing
- 11. Final assembly
- 12. End-of-line test
Export certification: Low-voltage motor without electronics
- Rated power
- 534 W
- Rated torque
- 0.85 N·m
- Rated speed
- 6,000 rpm
- Rated efficiency
- 66.8 %
Performance curves
Calculated with the linear DC-motor model (constant 40 V supply, ignoring resistance rise with temperature).
Full specifications
General
- Motor type
- BLDC Motor
- Series
- Topband AE64 outer-rotor BLDC
- Frame / flange
- Ø64 mm
Rated Values
- Rated voltage
- 40 V
- Rated power
- 534 W
- Rated torque
- 0.85 N·m
- Rated speed
- 6,000 rpm
- Rated current
- 20 A
Performance
- Stall torque
- 3.98 N·m
- No-load speed
- 7,631 rpm
- Rated efficiency
- 66.8 %
- Peak efficiency
- 68.5 %
Electrical
- Torque constant Kt
- 0.0486 N·m/A
- Back-EMF constant Ke
- 5.09 V/krpm
- Resistance
- 0.474 Ω
- Inductance
- 0.711 mH
- No-load current
- 2.5 A
- Stall current
- 84.4 A
- Electrical time constant
- 1.5 ms
- Mechanical time constant
- 6.43 ms
Mechanical
- Rotor inertia
- 320 g·cm²
- Body length
- 126 mm
- Shaft diameter
- 10 mm
- Weight
- 0.856 kg
- Power density
- 624 W/kg
- Protection
- IP40
Compatible drivers
All drivers →Drivers whose supply voltage covers this motor and whose continuous current is at least its rated current; drivers from the same maker first. Confirm Hall/encoder type and settings with the maker.
| Model | Maker | Motor type | Supply | Cont. / peak current | Feedback |
|---|---|---|---|---|---|
| NU-BL5020-01 | Nuelectronics | BLDC | 18–50 V DC | 20 A / 25 A | Hall sensors, Sensorless, Open loop, Closed loop |
| NU-BL5020-02 | Nuelectronics | BLDC, Servo | 18–50 V DC | 20 A | Hall sensors, Incremental encoder |
| BD20L□□1□ | Stonker Motor | BLDC | 24–48 V DC | 20 A | Hall sensors |
| DCPC-09030-OPE | ZP Motors | BLDC, Servo | 18–90 V DC | 21 A / 42 A | Hall sensors, Incremental encoder |
| ZM-BL48Z30S | Zeming | BLDC | 36–60 V DC | 30 A | Hall sensors, Sensorless |
| DBL-30RS | Mayi Motor | BLDC | 18–60 V DC | 30 A | Hall sensors |