AC Servo MotorKinco SMC 48 V servo · 60 mm
SMC60S-0020-30MAK-5DSU
200 W, 48 V low-voltage servo motor from Shenzhen-based Kinco (0.64 N·m rated, 1.92 N·m peak), IP65 body.
Manufacturer datasheet: Kinco (Shenzhen) · SMC60S-0020-30MAK-5DSU ↗ (checked 2026-10-18)Maker profile & contacts →
Figures are copied from the maker’s published datasheet; curves are calculated from them. Confirm with the manufacturer before ordering. Not stated on the datasheet, estimated from it: maximum speed, resistance, inductance, weight, length, shaft diameter.
How this motor is made
Full manufacturing overview: AC Servo Motor (60–130 mm flange) →- 1. Lamination stamping & stacking
- 2. Stator insulation
- 3. Winding
- 4. Phase connection & lead termination
- 5. Stator in-process test
- 6. Impregnation & curing
- 7. Stator shrink-fit into housing
- 8. Rotor assembly
- 9. Magnetizing
- 10. Rotor balancing
- 11. Final assembly (bearings, brake, oil seal)
- 12. Encoder mounting & commutation alignment
- 13. End-of-line test
Export certification: Motor for high-voltage drives
- Rated power
- 200 W
- Rated torque
- 0.637 N·m
- Peak torque
- 1.91 N·m
- Rated / max speed
- 3000 / 4000
Performance curves
Intermittent zone limitContinuous zone limit
Illustrative curve; actual limits depend on drive voltage and cooling.
Full specifications
General
- Motor type
- AC Servo Motor
- Series
- Kinco SMC 48 V servo
- Frame / flange
- 60 mm
- Encoder
- Per order code
Rated Values
- Rated voltage
- 48 V
- Rated power
- 200 W
- Rated torque
- 0.637 N·m
- Rated speed
- 3,000 rpm
- Rated current
- 5.7 A
Performance
- Peak torque
- 1.91 N·m
- Maximum speed
- 4,000 rpm
- Overload ratio
- 3 ×
Electrical
- Torque constant Kt
- 0.112 N·m/A
- Back-EMF constant Ke
- 11.7 V/krpm
- Resistance
- 0.6 Ω
- Inductance
- 1.19 mH
- Poles
- 10
- Electrical time constant
- 1.98 ms
Mechanical
- Rotor inertia
- 200 g·cm²
- Body length
- 80 mm
- Shaft diameter
- 14 mm
- Weight
- 0.9 kg
- Power density
- 222 W/kg
- Protection
- IP65
Compatible drivers
All drivers →Drivers whose supply voltage covers this motor and whose continuous current is at least its rated current; drivers from the same maker first. Confirm Hall/encoder type and settings with the maker.
| Model | Maker | Motor type | Supply | Cont. / peak current | Feedback |
|---|---|---|---|---|---|
| OD125S | Kinco | Servo | 24–48 V DC | 10 A / 36 A | Absolute encoder, Incremental encoder |
| FD125S | Kinco | Servo | 24–60 V DC | 15 A / 48 A | Absolute encoder, Incremental encoder |
| FD135S | Kinco | Servo | 24–60 V DC | 30 A / 100 A | Absolute encoder, Incremental encoder |
| FD145S | Kinco | Servo | 24–60 V DC | 50 A / 160 A | Absolute encoder, Incremental encoder |
| FD165S | Kinco | Servo | 24–60 V DC | 80 A / 240 A | Absolute encoder, Incremental encoder |
| APS-06D48-RALTE | TechServo | BLDC, Servo, DC | 18–48 V DC | 6 A / 18 A | Incremental encoder, Hall sensors, Sensorless |