XRotor V5212 275KV
5212 275 KV drone motor from Hobbywing for LiPo-12S: up to 9100 g thrust with a MSC 17x5.8 prop.
Figures are copied from the maker’s published datasheet; curves are calculated from them. Confirm with the manufacturer before ordering. Not stated on the datasheet, estimated from it: rated point (estimated from KV, voltage and maximum current), inductance, rotor inertia, insulation class, IP rating.
How this motor is made
Full manufacturing overview: 70 mm Outer-rotor BLDC Motor →Ø58 mm frame; built with the same process as the 70 mm outer-rotor reference series.
- 1. Stator lamination stamping & interlocking
- 2. Stator powder coating
- 3. Outer-stator winding
- 4. Terminal soldering
- 5. Stator in-process test
- 6. Trickle impregnation (optional)
- 7. Stator mounting & Hall board
- 8. Rotor cup assembly
- 9. Magnetizing
- 10. Rotor balancing
- 11. Final assembly
- 12. End-of-line test
Export certification: Low-voltage motor without electronics
- Rated power
- 698 W
- Rated torque
- 0.561 N·m
- Rated speed
- 11,886 rpm
- Rated efficiency
- 85.4 %
Performance curves
Calculated with the linear DC-motor model (constant 44.4 V supply, ignoring resistance rise with temperature).
Full specifications
General
- Motor type
- BLDC Motor
- Series
- Hobbywing XRotor VTOL motors
- Frame / flange
- Ø58 mm
Rated Values
- Rated voltage
- 44.4 V
- Rated power
- 698 W
- Rated torque
- 0.561 N·m
- Rated speed
- 11,886 rpm
- Rated current
- 18.4 A
Performance
- Stall torque
- 24 N·m
- No-load speed
- 12,170 rpm
- Rated efficiency
- 85.4 %
- Peak efficiency
- 88.9 %
Electrical
- Torque constant Kt
- 0.0347 N·m/A
- Back-EMF constant Ke
- 3.64 V/krpm
- Resistance
- 0.064 Ω
- Inductance
- 0.096 mH
- No-load current
- 2.25 A
- Stall current
- 694 A
- Poles
- 28
- Electrical time constant
- 1.5 ms
- Mechanical time constant
- 0.34 ms
Mechanical
- Rotor inertia
- 64 g·cm²
- Body length
- 37.2 mm
- Shaft diameter
- 4 mm
- Weight
- 0.248 kg
- Power density
- 2,816 W/kg
- Protection
- IP40
Compatible drivers
All drivers →Drivers whose supply voltage covers this motor and whose continuous current is at least its rated current; drivers from the same maker first. Confirm Hall/encoder type and settings with the maker.
| Model | Maker | Motor type | Supply | Cont. / peak current | Feedback |
|---|---|---|---|---|---|
| BLDA0401A1 | Motion Control | BLDC | 12–55 V DC | 18 A | |
| PSDB-4031A1 | Motion Control | BLDC | 12–55 V DC | 18 A | |
| ZM-BL48Z18S | Zeming | BLDC | 24–48 V DC | 18 A | Hall sensors |
| NU-BL5020-01 | Nuelectronics | BLDC | 18–50 V DC | 20 A / 25 A | Hall sensors, Sensorless, Open loop, Closed loop |
| NU-BL5020-02 | Nuelectronics | BLDC, Servo | 18–50 V DC | 20 A | Hall sensors, Incremental encoder |
| BD20L□□1□ | Stonker Motor | BLDC | 24–48 V DC | 20 A | Hall sensors |